01TR - FRAME
SKU | Name | Preis | Auf Lager | |||
---|---|---|---|---|---|---|
1 | 01001TR100 | FRAME (NATURAL ANODITZED) | 1.019,47€ | Auf Bestellung | ||
2 | 50801 | ALLEN, DIN7984 8X14MM - CHASSIS BRACE | 1,09€ | 27 St. | ||
3 | 01004TR103 | FRONT RIGHT SUBFRAME (BLACK ANODIZED ) | 19,90€ | 2 St. | ||
4 | 01005TR103 | FRONT LEFT SUBFRAME (BLACK ANODIZED) | 19,90€ | 5 St. | ||
5 | 01006TR100 | ENGINE BRAC | 24,49€ | 54 St. | ||
6 | 51502 | NUT. LOCKING TYPE, M8 ENGINE | 1,70€ | 19 St. | ||
7 | 01007TR100 | NUT, SWING-ARM SHAFT | 12,93€ | 3 St. | ||
8 | 63001 | SILENTBLOCK M6 20X15 | 8,16€ | 26 St. | ||
9 | 51501 | LOCKNUT, M6, SILENTBLOCK | 1,25€ | 12 St. | ||
10 | 51503 | LOCKNUT, M10X1.25 - LOWER ENGINE BOLT | 2,32€ | 19 St. | ||
11 | 01008TR100 | FOOTREST PIVOT SHAFT | 7,54€ | 23 St. | ||
12 | 70101 | FOOTPEG SET, STEEL Ø8 (L/R) | 55,57€ | 5 St. | ||
13 | 58006 | CABLE TIE 3,6X200 | 0,91€ | Auf Bestellung | ||
14 | 50307 | COUNTERSUNK SCREWS, M8X20 | 0,56€ | 6 St. | ||
15 | 56303 | WASHER M8, FOOTREST PIVOT | 0,11€ | 64 St. | ||
16 | 64003 | COTTER PIN 2,5X18 | 0,08€ | 3 St. | ||
17 | 50803 | ALLEN BOLT, DIN 7984 M8X55 - FOOTREST SUPPORT PLATE-BRAKE PEDAL | 2,84€ | 4 St. | ||
18 | 50802 | ALLEN BOLT, DIN 7984 M8X35 - FOOTREST SUPPORT | 1,25€ | 4 St. | ||
19 | 01010TR103 | SUPPORT FOOTREST RIGHT (BLACK ANODIZED) | 66,91€ | 2 St. | ||
20 | 01011TR103 | SUPPORT FOOTREST LEFT (BLACK ANODIZED) | 66,91€ | 2 St. | ||
21 | 51502 | LOCKNUT, M8 - FOOTREST SUPPORT | 1,70€ | 19 St. | ||
22 | 50105 | BOLT, DIN 912 M10X90X1.25 - ENGINE LOWER | 15,31€ | 5 St. | ||
23 | 01012TR100 | SWINGARM PIVOT SHAFT | 37,25€ | 5 St. | ||
24 | 50101 | BOLT, DIN 912 M6X10 - SUPPORT, BRAKE FLUID RESERVOIR | 0,33€ | 37 St. | ||
25 | 01013TR101 | SUPPORT, REAR BRAKE FLUID RESERVOIR | 4,99€ | 6 St. | ||
26 | 50102 | BOLT, DIN 912 M10X130 - ENGINE UPPER | 16,51€ | 2 St. | ||
27 | 50901 | BOLT, DIN 6921 M8X40 - CYLINDER HEAD SUPPORT | 0,58€ | 25 St. | ||
28 | 70206 | CDI (BLACK BOX) - (SEE (07) IN 09-EI-ELECRTICAL INSTALLATION SHEET) | 152,50€ | 4 St. | ||
29 | 50104 | BOLT, DIN 912 M6X20 - CDI MOUNTING PLATE | 0,34€ | 20 St. | ||
30 | 01014TR100 | CDI MOUNTING PLATE | 26,03€ | 2 St. | ||
31 | 58012 | CDI HOOK AND LOOP FASTENING STRAP | 5,21€ | 2 St. | ||
36 | 01016TR100 | ENGINE CRANKCASE RUBBER PROTECTION BLOCK | 14,82€ | 2 St. | ||
37 | 50904 | BOLT, DIN 6921 M8X16 - ENGINE PROTECTOR PLATE, FRONT | 2,04€ | 14 St. | ||
38 | 01017TR100 | ENGINE PROTECTOR PLATE (SUMP PROTECTOR) | 116,35€ | Auf Bestellung | ||
41 | 51301 | UNIVERSAL CLIP-NUT, M6 | 3,63€ | 9 St. | ||
42 | 01018TR100 | RESERVOIR, VENTILATOR | 7,82€ | 3 St. | ||
43 | 50909 | BOLT, ALLEN, M6X20 6921 DIN | 0,90€ | 4 St. | ||
44 | 70302 | BRAKE FLUID RESERVOIR | 33,91€ | 4 St. | ||
45 | 01027TR100 | FRAME PROTECTION LEFT SIDE | 16,90€ | 7 St. | ||
46 | 01026TR100 | FRAME PROTECTION RIGHT SIDE | 16,90€ | 15 St. | ||
47 | 53024 | O-RING 40X3 (BLACK) | 1,34€ | 175 St. |
Uvedené ceny jsou bez DPH. DPH bude dopočítáno na stránce pokladny.